Operating Voltage

12 Volts

Package Dimensions

10 x 7.3 x 2.9 inches

Item Weight

1.55 pounds

OBDII Protocol

ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN

Display

240×320 TFT

Vehicles' Compatibility

Works on most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles

Language

English, French, German, Russian, Spanish, Italian, Finnish, Dutch and Portuguese

ANCEL AD510 OBD2 Code Reader with Battery Check

Connection
Why this unit cannot be connected with the ECU?
If this unit cannot be connected with the ECU, please download and update the latest software version(connect to computer via USB)
Why the Vehicle Linking Error?
A communication error occurs if the scan tool fails to communicate with vehicle's ECU (Electronic Control Unit).

Answer: Verify that the ignition is ON; Check if the scan tool's connector is securely connected to the vehicle's DLC; Turn the ignition off and wait for about 10 seconds and turn the ignition back to on and continue the testing; Verify the control module is not defective.
Why the Scan Tool Doesn't Power Up?
Answer: Check if the scan tool's connector is securely connected to the vehicle's DLC; Check if the DLC pins are bent or broken. Clean the DLC pins if necessary; Check vehicle battery to make sure it is still good with at least 8.0 volts.
Why the Operating Error?
If the scan tool freezes, then an exception occurs or the vehicle's ECU is too slow to respond to requests.

Answer: Reset the scan tool first and turn the ignition off and wait for about 10 seconds and turn the ignition back to on and continue the testing.